October
2002
EnviroSeal is pleased to welcome Virginia Arbo
to the position of Administrative Assistant.
June
2002
-
An easy to install adaptor
for mechanical seal applications.
-
No modifications required
to the pump or to the seal cavity.
-
Installs easily between the seal and the
seal cavity.
Contact
EnviroSeal
for more information.
Please click on the thumbnail to expand the
picture.
May 2002
EnviroSeal is pleased to welcome Kurt
Grimsrud to the position of Technical Specialist.
June 2001
In
order to further simplify the ordering of our SpiralTracTM products we have
developed an
online order form.
Simply fill
out the appropriate form, submit while online and the information will be
e-mailed to EnviroSeal. When the information is received and processed, you will
be emailed back to confirm that the information is correct and your order will
be processed.
April 2001
The EnviroSeal Team just keeps getting
better.
Aniko Dunford, President of EnviroSeal, is pleased to inform you of the following
promotions recently awarded at EnviroSeal:
Paul Hughes -
Vice President - Distribution
Jerry MacAlpine -
General/Marketing Manager
Lisa Robicheau -
Controller
Joan Nolan -
Quality Assurance Tech.
Kirk Ryan -
Technical Support
Toby Humphreys -
Customer Support
|
March 2001
SpiralTrac Version P Type S is now available in
Metal
|
EnviroSeal being an innovative and progressive company is
always looking for ways to make our products easier to install and more user
friendly. We now offer the Version P Type S in metal. These devices
are axially split, permanent, and are compatible with the original metal lantern
rings found in some pumps. The ease of installation with this SpiralTrac gives
the benefits of a permanent metal device along with the ability to install into
the stuffing box without pump disassembly.
|
|
|
February 2000
SpiralTrac Version F Type S Improvement
In order to further simplify installation of the SpiralTrac Version F Type S,
EnviroSeal has implemented a new method of splitting and pre-fitting the ‘O’-rings.
For those of you used to removing and refitting the ‘O’-rings, you’ll find
now that all you have to do is separate the two halves, and install! If you find
it necessary to use the center ‘O’-ring groove for a tighter fit, then you
can remove and replace one of the ‘O’-rings. Other than that, it just doesn’t
get any easier to install than this! Please ensure that your colleagues and
customers are aware of this change. Installation Instructions for the Version F
Type S devices have been modified to reflect this, and an "Attention"
label will be affixed to the devices.
|
|
